Turned mower off, now won't start. TB Pony

[OldLyme]

model number 13wn77ks011
So out mowing, pull the blades handle up and put it in reverse and it starts trying to cut out. I knew something was wrong, put down the blades lever again blades activated, then pulled it up to turn it off again so i could reverse. Same thing happened again. So i shut the mower off... and now it won't start. What went wrong here.... also I'm getting nothing from turning the key. Battery has juice. thanks.

 

[BlazNT]

Sounds like the reverse switch is not working. Time to find it and blow all the crud from around it. Then check to see if it is working.

 

[ILENGINE]

BlazNT, the guy also has a thread in another section were we determined that the pto safety switch isn't disengaging properly. so the mower thinks the deck is engaged

http://www.lawnmowerforum.com/showthread.php/42981-Troy-Built-Pony

 

[BlazNT]

BlazNT, the guy also has a thread in another section were we determined that the pto safety switch isn't disengaging properly. so the mower thinks the deck is engaged

http://www.lawnmowerforum.com/showthread.php/42981-Troy-Built-Pony

Thanks for the info ILENGINE