Export thread

Turf Tiger Cat Diesel

#1

D

Dwellonroof

New here, I'm Martin from east of Cincinnati and am a new used Scag TT owner she's a Cat diesel 28 hp with around 340 hours and a 2015 model year I'm thinking.
That being said I noticed a slight oil leak at either a bolt or plug which I'm afraid to remove not knowing if it connects to the camshaft or something else inside.
If anyone here can help I would be grateful.
IMG_1112_LI.jpgIMG_1110_LI.jpg


#2

D

Dwellonroof

Update:
Went ahead and decided to see if I could fix the leak without taking anything else apart and found that it was only a plug with an O ring so I replaced the O ring and put a little axle grease on it before I installed it.
No Leaks!!!
7A9238F4-BDCA-4DCE-92D3-7883C4857F7B.jpgF40DC1CB-A8DE-4CB1-AE37-D391DFC6171B.jpgF3071E7D-28C3-428D-9C45-D8323F2E57DB.jpg

BTW I really like the Turf Tuger Diesel even though it weighs more than a gasser , it powers through the same wet spots as the old kohler powered one that I had a few years ago.
It will get stuck in the same spots also.


#3

D

Darryl G

Welcome to the forum and congratulations on the Tiger Cat. Those are pretty serious machines. Sorry nobody replied to your question but glad you got it resolved.


Top