So basically i was mowing and everything is going fine then all the sudden i come to a halt. engine runs fine, blades engage fine, but it wont go forward or reverse.
I jacked her up to check underneath and i dont see any belts or things hanging, everything looks good there. But i have a feeling the problem is more in the back by the engine. But, obviously, what do i Know!
My first guess is the drive belt (not the ones that go to blades) the belt goes from engine and around the hydrostatic drive for each rear wheel, it should have a pulley that has a spring that holds tension on belt all the time, if you have the manual look for drive belt and tensioner, the spring may have broken.
