Export thread

Tiger Cat will not start after mowing all day;Tiger Eye problem?

#1

E

estebank

I have a 2021 Tiger Cat with 142 hours. I used it to mow for 4 hours with no problems. After blowing the dirt off with my leaf blower the mower will not start. All safeties show satisfied on the Tiger Eye but when the key is turned the Tiger Eye just makes a clicking noise and the starter does not engage. I'm guessing it is the $350 Tiger Eye module which is most likely not under warranty any longer


#2

E

estebank

Hey thanks for the help everyone (sic).
I found the issue and fixed it. If anyone is interested, I will post the solution but it seems this issue is of not much interest to anyone.


#3

JGGMC

JGGMC

what was it?


#4

StarTech

StarTech

You got to realize not everyone works on everything. For example I only have three Scag SST61 under my wing and it been most deck problems. Most likely no one here has had that problem. Personally I am not going to guess at a solution.


#5

S

slomo

Filled the tank, with gas?


#6

M

MParr

Hey thanks for the help everyone (sic).
I found the issue and fixed it. If anyone is interested, I will post the solution but it seems this issue is of not much interest to anyone.
Post the solution!


#7

JGGMC

JGGMC

that clicking noise is a low battery


#8

S

slomo

that clicking noise is a low battery
Or corrosion, loose terminals, mice chewing or worn out parts.


#9

E

estebank

So sorry everyone! I got to mowing and forgot to reply. Getting older hasn't helped my memory.
The solution....replaced the old battery. I guess there was just enough juice left to start one last time and run the mower. So, when your tiger eye starts winking at you, pay attention.
It is hard to see the forest sometimes because all of the trees keep getting in the way.


#10

Its Me

Its Me

estebank​

don't want to be rude to you but you posted this (I found the issue and fixed it. If anyone is interested, I will post the solution, but it seems this issue is of not much interest to anyone.) why would no one be interested anymore as you said, I thought this Form was about question, answers, suggestions on repairs and explaining what the problems was, Joe​



Top