Export thread

I removed my flywheel to clean the motor. After reassembly the motor is not getting enough spark to crank the motor. How do I test the coils?

Here is a link to test ignition suystem

Briggs & Stratton Ignition System Testing | Small Engine Repair FAQ

hntrsr said:

Here is a link to test ignition suystem

Briggs & Stratton Ignition System Testing | Small Engine Repair FAQ

Click to expand...

Thank you very much!

fredcarp said:

I removed my flywheel to clean the motor. After reassembly the motor is not getting enough spark to crank the motor. How do I test the coils?

Click to expand...

Sounds like you need to leave well enough alone.... Did everything run great until you started messing with it?

Fish said:

Sounds like you need to leave well enough alone.... Did everything run great until you started messing with it?

Click to expand...

Sorry, I am new and I should have provide more information! It had a blown head gasket. Repair that with no problem. Ran great, but started smoking again. Check the PVC and found the hose and filter clogged. Clean that and then put everything back together. Started right up with no problem and did not smoke. Went to cut the grass and as soon as I pulled the electrical switch to engage the pto for the mower deck the engine shut off. And now it has no spark at the plug.

Plug, or plugs? Put up your engine's model numbers to start with.