Export thread

tecumseh 3.5 hp engine carborator

#1

T

throberts2

I have a model AV 600 660 -38 engine on a flymo. I rebuilt the carb and have a linage that I do not know how to install. see attached picture of the link. can anybody provide picture of carb with this linkage installed?

Attachments





#2

J

jp1961

2 stroke or 4 stroke?

Regards

Jeff


#3

Its Me

Its Me

It is a two stroke, I will take a pick of a 3.5 that I have here that is the same motor, will do best to post it tonight, if I remember right it went from the Carb. to the air vane governor, but that was a long time ago, I used to sell them, think I was 1983, they worked good until you would loose the cushion of air under them.


#4

T

throberts2

Yes 2 stroke engine


#5

J

jp1961

Hello,

I checked both my Chiltons and Intertek small engine repair manuals and don't see a linkage like yours.

The Tecumseh 4 horse vertical shaft engine used a mechanical governor, but most others used an air vane governor.

I have an engine similar to yours off and old trash picked mower and it doesn't have an arm like that.

Problem with Tecumseh is they made a TON of different engines.

I'd go on parts tree.com and check your specific model. I'd look for you but I've got work up the wazoo.

Regards

Jeff


#6

T

throberts2

Thanks for your efforts I have checked the manual online and do not see a configuration like this one. It is an air vain and there is no throttle. Since it is on a Flymo is a unique application


Footer Links 1

Top