Snapper wont move

Carscw

Carscw

Lawn Pro
Friend has a rear engine said will only drive in 5th and reverse. I am sure there is a adjustment for this ?
Thank you for your help

Sent from my iPhone using LMF
 
The plate on the motor shaft is probably bent and not making good contact. Pull motor and check the plate good luck
 
I've been meaning to ask a question about my Snapper RER 331416KVE -

It doesn't seem to like going in reverse. It will but it feels to me like it is much more difficult to put in reverse than it should be.

I am holding the clutch down HARD and then it takes a lot of my strength to get the handle into the reverse position and I need to hold it there so the mower will go backwards. Sometimes, it makes a metal-to-metal sound when it is reversing, which bothers me. Not like the gears are grinding, but metal-on-metal.

It does not want to go in reverse while the blade is engaged. Sometimes it will, but most times not.

Ideas?
 
SnapperLady said:
I've been meaning to ask a question about my Snapper RER 331416KVE -

It doesn't seem to like going in reverse. It will but it feels to me like it is much more difficult to put in reverse than it should be.

I am holding the clutch down HARD and then it takes a lot of my strength to get the handle into the reverse position and I need to hold it there so the mower will go backwards. Sometimes, it makes a metal-to-metal sound when it is reversing, which bothers me. Not like the gears are grinding, but metal-on-metal.

It does not want to go in reverse while the blade is engaged. Sometimes it will, but most times not.

Ideas?
Click to expand...

Don't hold the brake/ clutch Pedal so hard let it come up a little and you will get right into reverse. I have two snapper mowers and on both I have to hold it in reverse and they both make the same sound.

Sent from my iPhone using LMF
 
You must log in or register to reply here.
Back
Top