Export thread

I have a SPX with 42" deck.
My problem is that the mower leaves a windrow of clippings on the non discharge side.
It seems that there is a small discharge of clippings on the non discharge side.
vman

Clean out the underneath of the deck and inspect your blades for damage.

BlazNT said:

Clean out the underneath of the deck and inspect your blades for damage.

Click to expand...

The mower is brand new.
This happened the first time I used it.

Dealers have been known to put stuff together wrong, blades on upside down etc etc.

I still stand by what I said first.
It is also not uncommon with high lift blades.

BlazNT said:

I still stand by what I said first.
It is also not uncommon with high lift blades.

Click to expand...

I checked the blades and they are installed with the wings up.
The deck has no buildup of grass clippings.

Try low lift blades or it is the nature of that beast.

More important , how long was your grass and how much were you trying to cut off ?
Cutting too much or driving too fast can overwhelm the volume the deck can efficiently discharge.