Poulan PL 3314 Chainsaw

[MyBillyC]

Has anybody crossed paths with this model and if possible, does anybody know what it is cross referenced with in this conglomeration of makes? Any help would be appreciated as I am coming up empty.

 

[StarTech]

well it uses the 530017884 non plated cylinder with a 530017883 NCC piston which is use in the following models too. Basically it has a Poulan 42cc engine setup.

PP4018 PP3516AVX PP4218AVX PP4218 P4018WM P4018WT P4018WTL PP3516 PP3816 P3314WS P3314 P3314WSA P3416 PP4218AVHD S1970

Note you can not have a NCC cylinder and NCC piston at the same time; just will not work. It got to be either a NCC cylinder and plain piston or a plain cylinder and a NCC piston.

 

[MyBillyC]

Your reply is much appreciated. The saw was brought to me due to what appeared to be a fuel delivery issue. I tries searching this model number ay all of my usual places and came up dry. Now, I know the associated models to order parts needed. Thanks again, Bill

 

[StarTech]

Oh if that what you are needing here is a link to the IPLs.

Spare Parts - PL3314, 967061601, 967061701, 967061702, 967061801, 2016-05

shop.husqvarna.com

 

[MyBillyC]

Again, thank you for your help. I'll keep this info since I've seen a number of these saws badged as Craftsman, Homelite, etc. Bill