I have an older Poulan 300EX (model # PB19546LT) riding mower that I am getting up and usable. I just took the rear wheels off to install inner tubes and I noticed oil on both the drive shafts. So, I figure the output seals are probably leaking. But, in the mean time (before replacing them), is there a way to get more fluid in the rear end of this mower. If yes, where, how, much should be in there and what type of oil? Is there any How To articles for this?
Here are two manuals which might be of help. I’m guessing you will have a peerless transmission, as you didn’t give us a serial number. If you have more specific questions please post back.
