Export thread

Onan carburetor parts

#1

C

CajunMan89

Does anyone know where I can find a kit for an Onan 14 HP engine carburetor for my Toro Wheelhorse 72040? It runs pretty good, but I'm having trouble with the float sticking when I refill the tank with gas. I cleaned the carburetor, including all the parts and needle. I'm thinking the needle seat may need to be replaced. However, I'm having trouble finding parts. Chances are, I can't buy just the seat and will need a kit. I can not make out the serial number on the flywheel cover because it's scratched off.

Can anyone lead me in the right direction?


#2

Boobala

Boobala

Does anyone know where I can find a kit for an Onan 14 HP engine carburetor for my Toro Wheelhorse 72040? It runs pretty good, but I'm having trouble with the float sticking when I refill the tank with gas. I cleaned the carburetor, including all the parts and needle. I'm thinking the needle seat may need to be replaced. However, I'm having trouble finding parts. Chances are, I can't buy just the seat and will need a kit. I can not make out the serial number on the flywheel cover because it's scratched off.

Can anyone lead me in the right direction?

Here's a MAYBE ...
https://www.ebay.com/sch/i.html?_fr...=onan+engine+carburetor+rebuild+kits&_sacat=0


#3

C

CajunMan89


I appreciate it! Those are the same ones I found too, none seem to be the correct kit.


#4

cpurvis

cpurvis

If this is the same 14 hp Onan engine (single cylinder, horizontal shaft) used on the 2140 Cub Cadet, it uses a Nikki carburetor. Sorry I can't provide any info for the carb itself.


Top