and that's what it was. there were 2 wires "one green and one yellow".....that were near the directional pedal pivots. the yellow one was laying loose, with a wire cap and tape on it. the green one i assume was a ground. looked very rusty/corroded. took apart, wire brushed everything up, put new end on wire.Its item 24 on this diagram. Located behind the direction control on the right side of the transaxle
![]()
PartsTree - Home of OEM Parts for Outdoor Power Equipment
We are committed to providing you with the largest selection of OEM parts from the best brands, the best diagrams and part search tools anywhere.www.partstree.com
Also check the wire for bad spots that could be grounding out
now, blade engages anytime, and doesn't disengage when i reverse.
thanks for all the help.