mower hard to turn over after 6 months

B

builderpete

Member
I have a
Blackstock Wheeled Brush Cutter 173 V 137cc WGT 56-173. I used to be able to turn this over with just two fingers as it was so easy. After 6 or 8 months in the shed it is now heavy to turn over and when running only seems to be at half speed which is useless for a brush cutter. Anybody got any ideas. Gratefully received
 
If it has a blade, it is a "brush cutter", if it has string it is a wheeled weed eater in my opinion. A 137cc engine does not have the power to cut very big stuff.

What engine is on this machine? Is it a Briggs and Stratton with the black plastic carburetor?

From your description it sounds like the fuel system needs to be cleaned. The carburetor has had expired fuel sitting in it and has begun to break down and has sticky gum formation in the carburetor. All gasoline turns to a varnish if left sitting in a small quantity for an extended period of time, especially Ethanol blend pump gas (petrol)
 
Check the valves or most likely carb needle flooding the cylinder. Pull the oil dip stick and smell for gasoline. If you smell gas, fix the carb first then dump the oil a few times.

Do NOT try and run it with gasoline diluted oil. It will trash the engine.

Or you have tall grass chaff binding up the string head that needs cleaned out. Look for this first. String, wire or any debris holding the head. I'm not for sure if that has a clutch on the head or not.
 
You must log in or register to reply here.
Back
Top