Export thread

While mowing a couple years ago there was a rock hidden beneath some grass. The blade broke off and I retired the mower. Recently my push mower bit the dust so I want to repair this old Murray riding lawn mower. Looking for advice on how I would repair this. I purchased some bolt extractors, but not 100% certain I need that central bolt out. In my mind it would be, remove the center broken bolt, purchase a new mulcher kit in the PDF attached. Anyone have advice on this before I go and ruin something?

Mower: Murray 425015x92

Murray spindles are cheap. Look on ebay. Don't bother trying to fix the one.

You will need a new spindle assembly PN 1001200MA or its after market version. You can get a pair of the aftermarket for around $40. And you will 5ea per spindle 3/8-16 x 1.25 self tapping bolts if the spindle you are not already tapped and if tapped then regular 3/8-16 x 1.25 hex screws.

Be careful as there are a couple different versions out there in the after market,

Hammermechanicman said:

Murray spindles are cheap. Look on ebay. Don't bother trying to fix the one.

Pardon Our Interruption...

Deck Kit Blade Spindle Belt for Murray 425015x92A 425017x190B 42 Inch Deck 803467094502 | eBay

Find many great new & used options and get the best deals for Deck Kit Blade Spindle Belt for Murray 425015x92A 425017x190B 42 Inch Deck at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Click to expand...

StarTech said:

You will need a new spindle assembly PN 1001200MA or its after market version. You can get a pair of the aftermarket for around $40. And you will 5ea per spindle 3/8-16 x 1.25 self tapping bolts if the spindle you are not already tapped and if tapped then regular 3/8-16 x 1.25 hex screws.

Be careful as there are a couple different versions out there in the after market,

Click to expand...

Thanks to you both. It took forever and I had to dremel the top bolt, but I got the old spindle off after much labor. I am on the hunt for replacement spindles.