Export thread

the owner shorted out some wires we fixed them at one time I was getting a spark. now I'm not. what I need to know is how the system works. how the modual interaks with the magneto. or if some one has a manual or a web sit I can go to

A make would be a big help...!:confused2:

sorry I assumed I was in the toro forum I just put in model the serial is 2000332 if helps.

it has a modual with three wires orange ,yellow and light blue it look like it grounds the mag to kill engine.

Its the only one I can find and its not a very good manual.

https://www.dropbox.com/s/vr08ium5a60y2r3/3314-849Toro model56132.pdf

if it is a newer model engine the hot wire running from the switch has a resister on some model's. that could be 1 problem. also check the regulator for it's output(should be 14-16 volts, if i remember correctly). if niether of those, i would have to go back to the book's to make sure.