I have a John Deere LT155 and the metal sheathe affixed to the side of the drive pulley just started rubbing against the pulley. I notice it when I pull up the blades and getting ready to turn off. It makes a grinding noise and I thought the bearings were going out for it makes the grinding noise on just one side of the pulley. How or does this need to be fixed?
#2
Nwatson99
Sorry do you have a photo of what you are referring to, is it a belt guide bracket you are talking about?
#3
gfp55
The bearing may be going on the pulley or the metal guard may be loose. There should be a nut holding it on, sometimes they get loose and turn so they rub. Pictures would help.
