Export thread

Massey Ferguson 2518 (1694751) PTO not engaging

#1

M

MowJD

This is a hydro drive unit. I'm trying to figure out why the engine stops when the PTO switch is engaged. I checked all of the switches and interlocks that I can. The clutch engages when 12v is apllied directly. It has an RMO switch that I don't know how to check. Everything else seems to operate right. Any ideas on what I should look at?


#2

S

shiftsuper175607

MowJD said:
This is a hydro drive unit. I'm trying to figure out why the engine stops when the PTO switch is engaged. I checked all of the switches and interlocks that I can. The clutch engages when 12v is apllied directly. It has an RMO switch that I don't know how to check. Everything else seems to operate right. Any ideas on what I should look at?
Click to expand...

Does the engine stop when the PTO is engaged with the 12V directly?


#3

M

MowJD

No it operates the way its supposed to


#4

M

mechanic mark

Results see operators manual for pto clutch adjustment page 27.


#5

M

MowJD

I adjusted the PTO clutch and still the same results - the engine dies when I engage the PTO. When I apply 12v directly to the PTO while the engine is running everything works normally. Any other ideas?


#6

M

mechanic mark

http://service.mtdproducts.com/Training_Education/769_07182_2000 series/769_07182_2000_series.pdf this is for cub cadet, same principle, see pages 176 & 177 for evaluating pto clutch.

https://www.google.com/search?espv=...0.0..0.0....0...1..64.serp..0.0.0.DFlziJ_PBuY check these out also

Check your seat switch & wiring for being pinched or bare wire showing.


#7

B

bertsmobile1

Only thing that will kill the engine intentionally when you turn on the blades is the seat switch indicating you are not there


Footer Links 1

Top