Export thread

I lost all the oil from somewhere underneath.

I suspect one of the pumps.

My question is how do you remove the flimsy metal pulleys from the pumps underneath.

Ashely

http://www.husqvarna.com/ddoc/HUSI/HUSI2005_USen/HUSI2005_USen_I0503006_.pdf Use a puller, 2 or 3 jaw.

https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=2 & 3 jaw pullers

Purchase a can of Liquid Wrench brand penetrating oil, spray down & let it soak a while, wear safety glasses & gloves, using a large ball peen hammer & punch or chisel, strike pulley hard. Let us know how it goes, thanks.

Thanks, but a couple of things, one is that is not my mower, my pulleys are underneath with separate pumps mounted on top
I have tried many times with the three jaw puller, and he flimsy metal pulleys are just bending.

Thanks

Ashley

I know what you are saying about the pulleys bending. What I have done in the pass is drill three holes into the pulley as close to the center hub as I can. Then take a three bar puller with bolts and nuts and pull from there. You might want to also put some heat on the pulley hub as you pull. Even at that I have had to cut the pulley off the shaft and buy a new pulley.

Use a rattle gun on the puller the jerky motion also makes a big difference