Export thread

Husqvarna Z246 spring, deck belt came off

#1

B

benjimin

Husqvarna zero turn Z246 - "spring, deck belt" came off.
I scalped a ridge on my lawn and the mover blades stopped turning. I found a large spring on the ground, I am fairly certain it is the part called "spring, deck belt". Also the belt is now very loose. I am trying to understand where the spring attaches (the parts diagram does not show attachment points) and then figure out how to re-install it. If you have a picture or can describe it would be very much appreciated.


#2

B

benjimin

In another thread about belt tensioning Eggbert posted a diagram for a YTH24V42LS. Anyone know if the spring placement/Attachment on the Z246 zero turn mower is the same or similar to the YTH24V42LS shown in this attachment?

Attachments





#3

M

MParr

Customer service, manuals & support

Whether you need a manual or support for your chainsaw, robotic mower, lawnmower, grass trimmer, or other – Husqvarna's customer service is here to help.
www.husqvarna.com www.husqvarna.com


#4

StarTech

StarTech

There is a couple versions of the deck setup on the Z246 series.
1664732697268.png

1664732585529.png


#5

B

benjimin

StarTech said:
There is a couple versions of the deck setup on the Z246 series.
View attachment 62403

View attachment 62401
Click to expand...
Thanks Star Tech, your sketch is very helpful. When I get back to my house I will dive in and check the mower for which layout it might be. Then I can attack the bigger problem of how to reinstall the spring.


Footer Links 1

Top