Export thread

Need some help folks.

Engine starts fine, battery is good, but when pulling the knob to activate the mower nothing happens except a a very faint squeak ie blades don't turn

I'd be grateful if someone could advise a procedure I should follow for fault finding. Feels like it is electrical

Thanks in advance :smile:

It sounds like it could be in need of a cluch adjustment. There should be something in your owners manual on the settings. You would use a feeler gage. You can also double check to make sure your getting juice to the PTO. If your getting a squeak it sounds like it's trying to engage.

Thanks - I'll give that a go