Export thread

how to remove blade attachment boss from shaft briggs engine

#1

A

angellonewolf

any help i need to swap these around the small one with the pin in it it has not got a hole the other side to tap it out

the bigger one does not seam to have any thing retaining it on to the shaft is it just a case of a bearing puller to remove

thanks for any help angel

Attachments







#2

gfp55

gfp55

any help i need to swap these around the small one with the pin in it it has not got a hole the other side to tap it out

the bigger one does not seam to have any thing retaining it on to the shaft is it just a case of a bearing puller to remove

thanks for any help angel
First you may want to put some penetrating oil on the parts you are trying to remove, let the oil soak in good. Give it some time and reapply a few times. If the one with what looks like it's got a pin does in fact have a pin, get a punch and try to knock the pin out. After soaking with penetrating for some hours, lightly tap on the side, not to hard because you will damage things inside the engine. If it still won't move use a puller. Good luck


#3

A

angellonewolf

luck thats prob going to need an act of god to remove lol

yes oiled it yesterday will do again for for days before trying but was looking for how to remove if any one has seen theses before

thanks for the help


Top