I recently replaced the drive belt. During the process, I accidentally removed the wrong bolts on the transmission assembly which caused some oil leak from the assembly. As a result, I had to remove the transmission assembly and removed and refilled the oil. The lawnmower seems to work fine when the engine is running. However I noticed that it does not move freely as it used to be when the engine is off. Should I re-grease the rear wheel axle? Any advice is appreciated. Thank you
#2
Catherine
:welcome:
I'm going to move this thread over to our Honda section to see if we can find you some advice.
Adjust your drive cable according to the manual. It's available on Hondas website. Your drive belt tension changed because of the new belt. I suspect your transmission is fine.