Export thread

H802 engine - no spark

#1

T

tom_t

Stored mower for about 10 years. Ran fuel out. Stored in dry barn. Now no spark. Installed new ignition module. New spark plug. Wire brushed magnets on flywheel. Very very weak spark. What am I missing?


#2

Scrubcadet10

Scrubcadet10

Is that a 12h802?


#3

T

tom_t

Probably. Part of the model # is illegible. 6hp.


#4

Scrubcadet10

Scrubcadet10

get a screw driver, preferably the largest one you have, and see how close you can get it to the flywheel magnets before it starts pulling it.
the magnets generally should also be able to hold the screwdriver by themselves against the flywheel. and are you sure you installed the coil correctly, they're usually marked with "This side out" or "cylinder (Cyl) side"


#5

T

tom_t

Scrubcadet10 said:
get a screw driver, preferably the largest one you have, and see how close you can get it to the flywheel magnets before it starts pulling it.
the magnets generally should also be able to hold the screwdriver by themselves against the flywheel. and are you sure you installed the coil correctly, they're usually marked with "This side out" or "cylinder (Cyl) side"
Click to expand...
no markings on unit. will turn upside down & see what happens, Thanks.


Footer Links 1

Top