Gravely ZT HD 60 Clutch 4 wires need help

[Flick]

hit a branch while cutting the PTO Clutch stopped working so I took a look and seen two wires free.
I could not find out were they went I looked everywhere. so I was wondering if anyone could help me please.
4 wires two still hooked up and two not.

 

[StarTech]

They go to the diode. Does not prevent the clutch from engaging. Just keeps from possible staying engaged once you switch it off.

Full diagram here. Zoom in for clearer image and just the image around.
https://www.partshouse.ca/oemparts/a/grv/6053a67287a86609fc8356bb/wiring-diagram-04781600

 

[Auto Doc's]

hit a branch while cutting the PTO Clutch stopped working so I took a look and seen two wires free.
I could not find out were they went I looked everywhere. so I was wondering if anyone could help me please.
4 wires two still hooked up and two not.View attachment 71716

We need your product label information off of the machine. They have serial number differences and harnesses are usually different among them.

 

[StarTech]

it should be a late model 991084.

 

[Auto Doc's]

Looks like the connector pins got ripped off of the diode possibly. Maybe the diode got ripped out of the harness.

 

[Flick]

We need your product label information off of the machine. They have serial number differences and harnesses are usually different among them.

 

[StarTech]

Basically the same circuit except it has more fuses.

Gravely 991166 (025000 - 034999) ZT HD 60 Wiring Schematic

 

[Flick]

Basically the same circuit except it has more fuses.

Gravely 991166 (025000 - 034999) ZT HD 60 Wiring Schematic

is there a fuse for the clutch, if so location if possible.
I thank you for all your help. it runs great just blades will not engage.

 

[StarTech]

Yes according to diagram there is a 10 amp near the PTO relay. Just have to trace the wiring to find it. Sorry I don't have a 991166 here to look at.

 

[Flick]

Yes according to diagram there is a 10 amp near the PTO relay. Just have to trace the wiring to find it. Sorry I don't have a 991166 here to look at.

fuse is good, can you tell me what to check next?
I do ty for your help, I would love to get this fixed.