I have a mower lift I use with my John Deere Z345. Can I use it with a F680 Ztrak to lift from the front caster wheels that are attached to the mower deck? They aren’t quite built the same.
#2
StarTech
Should be no problem if the jack has adjust wheel cradles. I here I use the HFT 750 lbs lift on all mowers. Just had to remove the ATV H piece as it was hitting the decks on some mowers.
Should be no problem if the jack has adjust wheel cradles. I here I use the HFT 750 lbs lift on all mowers. Just had to remove the ATV H piece as it was hitting the decks on some mowers.
Thanks for the quick reply. Looks like it will fit. I just didn’t know if the junction between the two halves was stout enough to allow me to lift it all by the front caster wheels.
That's the one I got. So good to go with the F680? Thanks again.
#5
StarTech
I do the Z830A, Z925A, and Z950R lifts with my lift and never had a problem. And these have the 7 iron decks. I also lift the Gravely HD50 ZTRs along nearly all ofthe ZTR. The OEM ZTRs I have problems is the Cub Cadet as the decks are so low on some of them. On those I use a set of 2x8 under the lift arms and drive the mowers up on them to clear the decks and the lift foot.
