Export thread

DEATHTRAP

#1

kozy01

kozy01

ForumRunner_20130811_030908.png

Worst pushmower I've ever seen! Blade is bent, crank possible warped, had to glue a drive wheel back together, had no oil in it, the air filter was completely toast, the thing is a freak! It ripped the pull cable out of my hand almost broke my finger! Bolts that hold frame to engine are stripped! Should I just tell the people this thing is way too dangerous to operate? It looks about scrap or a 10 dollar mower. Poor thing.


#2

kozy01

kozy01

<img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16380"/>

Worst pushmower I've ever seen! Blade is bent, crank possible warped, had to glue a drive wheel back together, had no oil in it, the air filter was completely toast, the thing is a freak! It ripped the pull cable out of my hand almost broke my finger! Bolts that hold frame to engine are stripped! Should I just tell the people this thing is way too dangerous to operate? It looks about scrap or a 10 dollar mower. Poor thing.

ForumRunner_20130811_095553.png


#3

R

Rivets

Blade is also worn so bad that it can be seen in the photo. Needs a discharge shut, if you are a repair shop be fore it can go out. As we say, "Scrap the Caddy Clyde"


#4

kozy01

kozy01

Ha Mr Eastwood. The engine surprisingly runs pretty good so I think ill just keep the engine.


Top