acquired a toro self propelled. works but oil is dirty and I have tried to drain and apparently didnt get all of it.
Is there something safe to put in it that can flush it out and get it clean so I can put fresh oil in it and be clean ?
mower works but I know it needs cleaning inside. has the "6.5hp" motor
#2
OutdoorEnvy
Only thing I've ever done is just fill it with new oil and run it about 5 minutes and then change it again, doing this 2 or 3 times if it's really bad.
I am curious if there is something else that can be done. But that has worked when I've saved a couple mowers for friends/family. I'm not aware of any product made for flushing old oil out if there is one.
#3
AnthemBassMan
That's about the best way to do it. Next time, drain the oil by removing the plug on the bottom of the engine. And use a top quality oil for you mower. Stay away from any non-detergent 30 weight oil. That stuff is for antiques or door hinges. I use pure synthetic oil in my mowers, and have a 23 year old mower that still fires up on the first pull and doesn't blow smoke.
Get some Wally mart/ Lowes/ Kmart etc garbage engine oil , the lighter the better.
Change the oil with this crap then run for 5 minutes and change again.
If the crap oil is really dirty run some more through .
Your workshop calls this "flushing oil" which it is not as flushing oil if aggressively detergent but it is also expensive.
