Export thread

Carb. Linkage and springs for Husqvarna yth24v48 with b&s vtwin

#1

H

Harryboom

Forgot how to re-attach linkage and springs


#2

Scrubcadet10

Scrubcadet10

Will need engine model information
Briggs and Stratton Engines model and type locator

1620093430148.png

1620093439411.png


#3

S

shrinerguy

24 hp briggs and stratton v twin model 44n877 group 0003g1. Took carbs off to rebuild, and didnt pay enough attention on linkage hookups. Especially the springs, like choke return spring, where does it attach? I think I figured out the rest but would like to verify all the linkage.


#4

B

Billrb

shrinerguy said:
24 hp briggs and stratton v twin model 44n877 group 0003g1. Took carbs off to rebuild, and didnt pay enough attention on linkage hookups. Especially the springs, like choke return spring, where does it attach? I think I figured out the rest but would like to verify all the linkage.
Click to expand...
Harry, did you ever get a resolution on this? I have the same issue with the same carburetor, I'm looking for pictures of the linkages. Thanks


#5

E

Erbid

Here are the pictures I took on the way in. Not comprehensive but got my v-twin w 2bbl carb running well once after a carb clean and again after a replace. The throttle/choke control connects to the bottom hole on the disk below the carb (which seems to have a place to attach it for frversed function).

Erbid

Attachments













#6

D

davis2

shrinerguy said:
24 hp briggs and stratton v twin model 44n877 group 0003g1. Took carbs off to rebuild, and didnt pay enough attention on linkage hookups. Especially the springs, like choke return spring, where does it attach? I think I figured out the rest but would like to verify all the linkage.
Click to expand...
Your cellphone camera is your friend on that stuff.


Footer Links 1

Top