this carb does not have any solenoid. is was a replacement engine. the gas is gravity flow in the engine. the only problem I have is I cant get gas past the bowl . there is gas to the bowl but when I take out the idle screw on the bottom of the back of the carb there is no fuel coming out. don't know if is for fuel or air. I cant remove the carb because the bolts are on the bottom up. and would have remove the drive and shroud to remove the intake and carb. hoping that the problem is plugged between the idle screw and the butterfly. if so maybe I can clean it out so it will run. engine did run but only on choke now it wont run to all . unless you put gas or carb cleaner in the top of the carb.
thanks