Briggs & Stratton ID-ing Help

[Gearheadmike]

So i just picked up a International 382 Cadet mower with a B&S research shows these are supposed to be 11hp but to me it looks like a 8hp and

When i look up parts and place the model number in nothing shows up.
# is 190707-0799-01 73062111

 

[ILENGINE]

try 190707-0799-99 instead. some of the old engines use a generic trim number. 19 series engines are normally 8 hp. The 11 hp should be a 23 series if I remember correctly.

 

[Boudreaux In Eunice La.]

19 series are a 8 HP .... What parts are you looking for ???? If you are searching for a part number in the Briggs site then the model number only not the Type numbers..... Unless you are looking for the parts manual....

Let us know Mon Ami ~!~!

 

[Boudreaux In Eunice La.]

If you are looking up the manual on the Briggs site then only the Model and type are typed in.. Not the - 01 or - 99

Just 190707 0799 with no dash.....

 

[Gearheadmike]

well 8hp and year of 1973 that tells me it's not original seeing machine yrs were 79-81
I also just pulled head do to low compression and found the exh valve seat hanging out. After cleaning i seen previous repair attempts to peen the seat but failed. Along with the pcv breather assembly was drilled out??? I guess ill look for a modern ohv engine. Thanks for info tho!

 

[Boudreaux In Eunice La.]

Mike do you have the points and condenser on that engine ?? Those are good engines to rebuild if nobody did toooo much other rigging to it.............