Export thread

briggs 331877-2371 g5 wont crank all the way around

#1

K

karls

won"t crank all the way , only with spark plug out, valves adjusted. valves move a good amount and cranked, don"t think its the cam, unless the lever is broken.


#2

R

Romore

The compression release may have failed, it is a common problem on that series. The replacement cam shaft is an improved design


#3

K

karls

thanks


#4

K

keakar

karls said:
won"t crank all the way , only with spark plug out, valves adjusted. valves move a good amount and cranked, don"t think its the cam, unless the lever is broken.
Click to expand...
i just had this with 2 engines, i found these kits were the best way to go https://www.ebay.com/itm/Camshaft-f...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649


#5

biggierat

biggierat

I am looking to buy a camshaft I have read the aftermarket will not last either any suggests for a good camshaft . Thanks


#6

Scrubcadet10

Scrubcadet10

For this same engine?
If so Briggs superseded and i believe upgraded to the new part, https://www.jackssmallengines.com/jacks-parts-lookup/part/briggs-stratton/84005207


Footer Links 1

Top