Newbie first post.
I recently acquired a neglected 126T02-0301-B1 (09084456) with bad varnish in the carb. I removed the carburetor and did an ultrasound clean.
On reassembly I notice that the autochoke mechanism is not connected properly "inside" the engine (under the silver shroud).
It is properly connected on the carb but the other end of the linkage is just flopping around under the shroud.
I believe this is designed to open the choke to allow more air into the carb once the engine is spinning.
Before I start randomly removing parts, can anyone please list the minimum teardown steps needed to get under that shroud to reconnect whatever it is that is disconnected/loose or broken in there.
Also, does anyone have any photos or videos showing what to expect under the shroud in a properly adjusted engine so that I can compare the pictures against whatever I find.
If anyone knows how to find a free service manual for this engine... that would be great.
Thanks
