Export thread

Bad boy MZ starts but when handles pulled in to move it dies

#1

R

rcodycolt83

The park brake cable broke. I wired the sensor to where it will start. Now when I start it, and pull the hydrostatic handles in, it dies. Checked the 2 fuses that I can find and when I unplug the sensors on the hydrostat and plug them back in, I can hear the click like the sensor is working.


#2

StarTech

StarTech

Well I take it jumpered the brake switch. If so that is the problem as it must switch from a closed circuit to an open circuit in order to operate the mower.


Top