Bad Boy Maverick HD right tank not flowing

[rainman14624]

I've had this Bad Boy for about a month, and the Kawasaki died like it was out of fuel. I had put 6 gallons in each tank, so I couldn't have burned all that fuel. I checked the left tank. Empty. The right tank was completely full. Not going to take it back to the dealer until after the cutting season is over in another two months. The fuel line is hooked to the on-off valve but I haven't traced it to the tank. It's been too hot. Anybody ever experience this?

 

[Auto Doc's]

I think the crossover line going from tank to tank has a shutoff valve made into the line.

 

[rainman14624]

There is a shutoff valve that both fuel lines plug into. The valve has on and off. The next time I get on the mower, I'll put the selector in the middle and see if that works.

 

[Tiger Small Engine]

There is a shutoff valve that both fuel lines plug into. The valve has on and off. The next time I get on the mower, I'll put the selector in the middle and see if that works.

The tank crossover valve is either on the left position, for the left tank, or on the right position, for the right tank. There is no middle position that has fuel flow to both tanks.

 

[MParr]

I've had this Bad Boy for about a month, and the Kawasaki died like it was out of fuel. I had put 6 gallons in each tank, so I couldn't have burned all that fuel. I checked the left tank. Empty. The right tank was completely full. Not going to take it back to the dealer until after the cutting season is over in another two months. The fuel line is hooked to the on-off valve but I haven't traced it to the tank. It's been too hot. Anybody ever experience this?

Give us the model number and serial number of the mower. You may have a faulty valve or the wrong valve installed from the factory.
It's supposed to have a 3 Way valve.

 

[ILENGINE]

The tank crossover valve is either on the left position, for the left tank, or on the right position, for the right tank. There is no middle position that has fuel flow to both tanks.

Give us the model number and serial number of the mower. You may have a faulty valve or the wrong valve installed from the factory.
It's supposed to have a 3 Way valve.

Something is goofy. The parts diagram shows a 3 way valve but the service manual shows a 2 way valve with the on-off lable for the valve on at least the 2025 model

 

[rainman14624]

Give us the model number and serial number of the mower. You may have a faulty valve or the wrong valve installed from the factory.
It's supposed to have a 3 Way valve.

Bad Boy Maverick HD 48-inch cut with Kawasaki FX691V. Serial BMH48FX69105230006. Leftover '23 model that I got at a nice discount. Wrong valve makes sense to me.