Export thread

B&S locks up after several pulls

#1

B

ba_50

020909 fe
120402 0213 E1
This horizontal shaft locks up after 6+ pulls on the recoil starter.
The oil level and starter is good.
With the shroud off the flywheel can be turned backwards then will turn


#2

R

Romore

Sounds like it is flooding.Do you get a spray of gas if you remove the spark plug and pull the cord?


#3

B

ba_50

It wasn't getting any gas at all, just the carb spray I put in. Pulled it 12x with plug out. It didn't jam. No fuel coming out.

Tried some carb spray again and got it running. Too much the first time I guess.


Top