Export thread

914H would like to adjaust Hydro balance.

#1

H

Hitechluddite

Put all new belts on it and a new generic EBay carb. it runs good and the plug looks good now. I might adjust the governor linkage a little in the near future but want to run it some more because it was sitting for some time before I bought it. The mower creeps slightly while in the center neutral position. It's not a big deal but if it is a simple alignment I'd like to make it right. I was able to go to Simplicity's site and download a parts and owners manual but pages 21-30 are missing and that is where the alignment instructions are any help is much appreciated!


#2

JoeM(GA)

JoeM(GA)

I have a PDF of the 900 series service manual you're welcome to, if wanted, shoot me your email

joe


#3

J

johnorlandi

I believe all the tractors are the same I have tried to attach a Sovereign manual but it is large I have tried to attached a screen shot and it would not allow me to so if you want the manual give me you email address
johno778@cox.net and I will send to you can also add the 918H to it


#4

J

johnorlandi

I was able to upload in a pdf format see if this helps

Attachments


  • neutral adjustment.pdf
    209.2 KB · Views: 5


#5

H

Hitechluddite

Igot it THANKS


#6

B

bertsmobile1

reported


Top