higher resolution images here/click the link
ps. to insert/link images in post - a nightmare
Attachments
#2
demhustler
technically, the fast & easy way to stick 20-21'' wheels - is to flip motor mounts upside-down, add 4 of 2.25'' spacers to keep wheelmotor away from frame and mount it on 4 corner bolts (2 middle holes not centered and will not align). not the best or reliable solution, but instant gratification, you don't have to drill the frame, not intrusive and easy (though you will have to pull wheelhub to flip the mount), but you ready to go in an hour or two.
better solution - bracket, which you can adjust depending of wheel size (the bigger the wheel, the higher it mounts on the frame to keep deck level horizontal).
...
10x22 wheel mounted. org. 8x16 (8 inch rim, 16'' tire diameter), i put 8x20
....
#3
demhustler
8x20 and 10x22
next...
why not this one. 12x25
not bad. wheel doesn't seems a bit too big. may be mower looks a bit too small : )