2018 pony drive engagment

[Cweber5156]

Just picked up a 2018 troy bilt pony
Model #13AN77BS011

Everything engages fine. All belts and pulleys are good. Main pulley on top of transmission spins. But tractor will not move.
I messed with the shift shaft a bit and I got it so it will engage in reverse. But if you select forward OR reverse it will ONLY go in reverse.

Any ideas? I assume something internal in transmission.

 

[mechanic mark]

https://www.troybilt.com/en_US/manualsearchresults

See troubleshooting section in Operators Manual. Let us know how it goes, thanks, Mark

Cweber5156, thanks for getting back & congratulations on solving problem.
Link works, bottom of page download manuals, enter model & serial numbers to get Operators & Parts Manuals.

 

[Cweber5156]

https://www.troybilt.com/en_US/manualsearchresults

See troubleshooting section in Operators Manual. Let us know how it goes, thanks, Mark

So first of all your link dosent work.
And pretty obvious from my post this wasnt a simple case of "use the manual for troubleshooting" but thanks for the effort?

I pulled the transmission apart and the shift fork was bent. New one ordered. Mystery solved.