OK, I adjusted the valves and the engine cranks and starts fine.
The engine is surging a little and it never did before, I don't think I have the valve clearance correct on all of the valves.
The adjustment was difficult because the adjusters are a torx bit with a locking nut, whenever I had the proper clearance and
tried to lock down then locking nut even though I was trying to hold the torx screw it seemed to get out of adjustment again.
I also had a difficult time knowing when the piston was exactly top. Maybe I am not adjusting on the right stroke.
Exhaust opens and closes then intake opens and closes, I assume this is where I am supposed to adjust both valves.
If this is not correct please tell me the proper procedure.
When I adjusted the valves on my motorcycle there was a mark to line up the crank. Maybe I am missing something here.
I did follow the procedure on youtube.
Thanks to all that shared info. it has been a great help.