9 99x Forum Newbie Joined Sep 14, 2021 Messages 6 Jun 9, 2026 #1 Doesnt want to idle but open up the throttle and it runs good. Carb was cleaned, then replaced Vales were checked and set at .010 It will try to idle but pops back through carb. Im running out of ideas. Thanks
Doesnt want to idle but open up the throttle and it runs good. Carb was cleaned, then replaced Vales were checked and set at .010 It will try to idle but pops back through carb. Im running out of ideas. Thanks
R Rivets Lawn Royalty Community Leader Joined Mar 11, 2012 Messages 16,252 Jun 10, 2026 #2 Please post engine updates so we can see which engine and carb you are working on. .010” valve clearance seems way to much.
Please post engine updates so we can see which engine and carb you are working on. .010” valve clearance seems way to much.
A Auto Doc's Lawn Addict Community LeaderTop Poster Of Month Joined Sep 7, 2024 Messages 3,282 Jun 10, 2026 #3 What is the model number on this 13HP engine? Blind internet guess: Worn out camshaft or bad intake valve and seat. It is unusual to have .010 valve lash, but it should still run.
What is the model number on this 13HP engine? Blind internet guess: Worn out camshaft or bad intake valve and seat. It is unusual to have .010 valve lash, but it should still run.
