mtd

My MTD 115/76 with a Tecumseh Formula 12.5HP Engine was working ok but then will no longer start. I have changed the inline fuel filter & fuel ssems to be getting to the carburettor ok, but there is no sign of wetting on the spark plug. Reading comments there seems to be an issue with this type...

My cousin brought a MTD snow blower to me. He said he got it with no compression. The engine has the number 270-WJ. It looks like it has seen very little use. Oil looks almost new. I have never messed with a MTD engine. Not sure if there are any problems that are common to these? I was going to...

Is there a way to find/get the model number for my Craftsman (MTD made) 159cc self propelled push mower? The model sticker came out a few years ago. There is a metal MTD tag on the side of the BS motor but it only tells what oil to use. I drug it out yesterday to mow the yard and the wheels...

tractor starts/runs just fine. manual blade engage, not electric. if i try and engage the blades while stationary....it kills the motor. if i engage the blades while it's moving....all is good, engages just fine. there a safety switch somewhere? if so, i'd really like to bypass it instead...

Good morning. Do you know how I should connect this cable to charge my riding mower? It's loose now and doesn't seem to charge. I look forward to hearing from you.

Does anyone know the actual manufacture date of these MTD batteries? This is an MTD battery (not original to my Cub Cadet XT1 machine). It did come out of another XT1 I bought and sold. Anyhow, the recharge date on it is March-2017. You can read on the label they recommend charging the battery...

Trying to remove the Drive wheel using puller and mallet, it did come off but axle came off too. Axle is back on and secure but need to refill fluid. Question is how much and what type?

I picked up a MTD 13AQ608H729 riding mower. Runs and mows good. The problem I have is the deck height. On the highest setting the blade height is only 3 inches. I don't see any way of adjusting the deck height any higher. I have leveled it side to side and front to back. Is there a way to...

I am looking for a "Fast Attach" bracket (left side) for a Cub Cadet model 19A30037100 FastAttach All-Season Plow. The part number is 689-00685 (part 17 in the attached diagram). I've searched online the best I'm able without luck, so I thought I'd try my luck here. Does anyone have a magic...

What colour of green can i get to match the Green on my machine model ta4140 14-76

Hi Does anyone have an image of where the deck spring hooks on at the rear. Got my deck off and can’t remember where the spring goes

11A-A22J766 mower. Engine is a Chinese Honda clone 140cc. I cleaned carb w/ USC = no joy. New carb installed = no joy. Valve lash good at .005 Int & Exh. I can only get a 3 second run - seems moderately strong. Sounds like fuel delivery, eh? Fuel line flows adequately out of tank. Governor...

Yardman Model 13AV9YG371 18 hp Kohler, 42" deck A simple main drive belt replacement has caused my repertoire of cursing at the stupidity of the American Yardman "inventors" to increase exponentially over last few days... Yep, like a few you tube blokes show, I'll undo the engine to slip the...

People, I have a MTD rider mower, and the parts list shows the belt guards as 783-0343A. Usually, ebay or amazon has such parts but I could not find my part #. UNLESS there is a parts # change. Can anyone advise on this? Should I be looking for a new part # for my 2 guards? Thanks, people.

i have a cub cadet xt1 model number 13a8a1cs010 with the following engine mtd 547cc model 1tm1qcd449 / 4x90hu the mower starts up great but will surge at low throttle and when you increase throttle will still surge but when you engage blades the surging goes away and mower runs great, concerned...

Hello, I'm hoping someone may be able to help me. My husband has an MTD Lawnflite 12.5/38 manufactured on 30 June 1987. Number on it is 137-667-611 / F307H, and there's another number which we're not sure what it refers to (on a sticker): 91-004-5418. The problem is he thinks it needs a new...

Model# 13AG601H729 Serial# 1A185H20259 I’m replacing the spring(s) for the forward/reverse drive pedal and need clarification. Existing spring was bent and there were several other issues that needed attention. The attached parts diagram shows there are 2 springs, but there was only one...

The machine has a 12hp 42 inch deck that in 2020 I installed a YTX12-BS battery (10Ah/180CCA) Can/should I use a ST5L-BS (4.5Ah/80CCA)? Was the first battery selection overkill?

Hi Guys Hoping to find some help please, I have the above machine which has just been fitted with a new electromagnetic clutch. Unfortunately the blades refuse to operate now, although it was working ok until the clutch packed up. Cannot seem to find a manual or in depth wiring diagram for...

I have a Yard Machines/MTD model 12A-A1BA729 self propelled mower with a Briggs and Stratton motor. I received it from a relative who was tired of dealing with it. For me, every time I went to use it after it had sat for even a few days I had to remove and clean the carburetor; otherwise it...

Cranks and runs great until I run into high grass and engine dies...... usually after about 45 minutes or so. Then when you try to crank it.. the engine acts like the piston is swollen and will not turn over. If you raise the mower.... you can move the blade back and forth but can not crank...

Can anyone tell me where to get tech specs for an MTD 1P65M0 engine off a push mower? I'm talking torque specs, piston/bore dimensions, etc... My son's school no longer teaches small engines so we're going to do it at home and picked up an MTD mower from a friend. I found 1 thread here with...

Hello everyone, not sure if you can help me, but I am trying to change a sump gasket on a MTD 4X90HU motor. I am waiting on the parts and trying to get some info and not having much luck. Any other Torque specs would be great too. Thanks in advance

Looking for a full PDF of the Bolens MC2800 (chipper/shredder) owner’s/service manual. Model may be listed as MC-2800 or MC2800 (possible appliance code 47018). Willing to credit the donor. Need the complete manual (safety, assembly, parts list, maintenance). If you have a scan please DM or post...

Hello everyone. I'm working on a MTD 141-848H118 46 inch mower deck. The left side spindle (with two 5 inch pullies) is locked up. I was able to find the replacement spindle and have ordered it. I'm unable to find the replacement pullies: top pully part number 756-0520, bottom pully part number...

Hi just changed the belts on mower and put it back together, does anyone know where that cable that you can just about see under the belt attaches to?

After now owning two AYP version riding mowers, one a 42" cut, the other 38" cut, I decided I'd like to find an earlier MTD 600 series from the late 80's early 90's. I happened across a Marketplace listing for this Tradesman, a bit pricey but the seller was also interested in trades. I may a...

Hi, I have a MTD 115/76 with a Tecumseh 12.5hp engine. It recently stopped and will no longer start or appear to fire when turning over. I have changed the inline fuel filter and when I took out the spark plug it was dry so wondered if there was a carburetter problem. Any advice on what to do...

Hi, I am refurbishing a 1998 Yardman Model 13aa473a643, when I took it separate the big spring attached to the deck fell off, all the drawings I have looked at does not show clearly where it's attached to the deck, I have attached the spring where I think it goes but since I have done that the...

I just picked up a used yard machine 31cc cultivator ( model number 21A-121R900 serial number 1C128DG0096) when I went to look at it there might have been a half teaspoon of fuel in the tank. the guy started it and it ran for about a second and a half. The guy said that he did not have anymore 2...