husqvarna
-
N
Husqvarna 4623 - Muffler
I think the correct replacement part # for the Husqvarna RZ4623 muffler is 532149723 It sat unused by the prior user for at least a year, maybe more, and now that we're running it the muffler seems to be getting louder, fast. Will I also need the gasket set? Does the picture suggest that I... -
M
Husqvarna rz 5426
Looking for help. it tries to move forward and backwards but only moves a couple of inches I don’t see a hydraulic reservoir on the mower. Tension spring is ok and belt is in good shape. any ideas would be greatly appreciated- mike coulter
- Thread
- husqvarna
- Replies: 5
- Forum: Husqvarna
-
N
Husqvarna RZ4623 - Fuel Tank Air Vent
When replacing the fuel tank vent - is it just pulled out and the replacement pressed down in its place? Or, is there a nut or clip inside that has to be, somehow, accessed? Thanks! -
N
Husqvarna RZ4623 - Fuel Leak Under Carb
The hose and clamp appear to to be intact. Where else should I look for the cause of a tiny but dangerous leak in this area, please? Sorry for all the questions - I'm trying to get this used machine in good shape for the Summer. Thanks! -
R
Husqvarna YTH18542 won't start
I have a Husqvarna yth18542 tractor mower that won't start. I recently had someone work on it and got it back running from sitting up last year due to me not having time to mess with it. I changed the battery out the next day and it cut off on me after a few minutes of riding around. Now when... -
K
Husqvarna YTH24V54-drive belt wont stay on backside pulley
The drive belt will not stay on the backside pulley when the clutch (left pedal) is derpressed. it is a brand new belt and i am sure it is the right one. I tried to replace the pulley, but the bolt turns with the nut. I don't see any way to get a wrench on top without taking the complete body...- kardoc
- Thread
- drive belt husqvarna
- Replies: 2
- Forum: Small Engine & Mower Repair
-
R
Husqvarna m-zt 52 Will Start But Moving the Control Handles or Releasing Park Brake Turns Engine Off
M-ZT Will Start But Moving the Control Handles or Releasing Park Brake Turns Engine Off. Was mowing, engine started to miss, thought it was out of fuel. It stopped. Filled it with fuel. Engine started ok and seems normal, but, releasing the Park Brake or moving Control Handles kills the engine... -
B
Husqvarna z354 zero turn mower problem.
I have a problem with my 354 zero turn's left transmission seriously losing power. Has anyone in the Charlottesville VA area had a good experience getting work (repair/rebuild?) done for a similar problem. Thanks, Bruce