echelonphoto
Member
- Joined
- Aug 19, 2019
- Threads
- 5
- Messages
- 18
So I had to replace the throttle bracket on my snapper 13.5hp because the little nylon slide that holds the cable snapped...not too hard a job...got it back together and now the mower wont start...I think the problem is a thin black wire that comes out from under the flywheel shroud..need to know where it hooks up...is it a ground, or does it connect to the other two wires that are hooked up together on a stand alone stud mounted on a plastic insulator that mounts to the bracket. couldnt find any real diagrams on this.