Hey all, hoping this is the right place for this kind of an issue.. First post, so don't shoot me if something doesn't exactly make sense, I'm very inexperienced with engines and just hoping someone can point me in the right direction.
I bought a Husqvarna LTH140 a couple years back, always had issues starting it which led to me cranking the engine much more than it needed to be cranked, as this year I finally realized what the issue was, which is the choke is not closing the valve. I looked into it, and noticed that the lever doesn't move the linkage to the choke, but can't seem to figure out where I need to reconnect it.
I attached 3 pictures, hopefully someone can help. The tractor works well if I manually press the valve closed to start it up, but obviously don't want to keep popping the hood every time I start her up. Thanks in advance!
I bought a Husqvarna LTH140 a couple years back, always had issues starting it which led to me cranking the engine much more than it needed to be cranked, as this year I finally realized what the issue was, which is the choke is not closing the valve. I looked into it, and noticed that the lever doesn't move the linkage to the choke, but can't seem to figure out where I need to reconnect it.
I attached 3 pictures, hopefully someone can help. The tractor works well if I manually press the valve closed to start it up, but obviously don't want to keep popping the hood every time I start her up. Thanks in advance!