Results 1 to 7 of 7
  1. #1

    Join Date
    Jan 2018
    Posts
    26
    Location
    South Carolina
    Mower
    John Deere

    Honda gvc 160 engines

    Dumb questions
    :
    Which end of the emulsion tube goes into the carburetor tube first?
    How do you release the fuel line Honda clips and Are there alternatives to these Honda wing clip?

  2. #2

    Join Date
    May 2010
    Posts
    6,181
    Location
    Illinois
    Mower
    kioti/rhino finish mower

    Re: Honda gvc 160 engines

    The emulsion tube will only fit into the center of the carb one direction Small end will stick up into the venturi of the carb when installed. The little wire clips don't normally create enough pressure where you cannot just pry or push the line off of the connection points on the carb, shutoff valve, and fuel tank. Just try to avoid twisting the line as it can cause damage with the new low emission fuel lines.
    ILLINOIS ENGINE, BEECHER CITY, IL
    BRIGGS AND STRATTON MST (MASTER SERVICE TECHNICIAN)
    Sales and Service for Dolmar/Makita, Poulan, Briggs and Stratton, Kohler, Lauson(Tecumseh, LCT), Brute, Honda, Subaru
    Warranty service for Snapper sold at Walmart, Craftsman by MTD, Murray, Karcher, Earthquake, Yamaha engines, American Landmaster, Worx, Rockwell Tools, Great Lakes Technologies products(Wen, CZ), Generac portable/DR power and others.

  3. #3

    Join Date
    Jan 2018
    Posts
    26
    Location
    South Carolina
    Mower
    John Deere

    Re: Honda gvc 160 engines

    Thank you.
    With your information, I am about ready to re install carburetor that I just cleaned for my.honda 160 engine.
    Thanks again.

  4. #4

    Join Date
    Jan 2018
    Posts
    26
    Location
    South Carolina
    Mower
    John Deere

    Re: Honda gvc 160 engines

    Help needed for where to buy honda .
    carb fuel line. It is the one that goes from carb to shut off valve. Believe it has a curve on one end
    I see some listed on internet but not sure which one would fit my Honda:
    Honda Engines GCV160A N1AF ENGINE, USA, VIN# GJAEA-1000001 TO GJAEA-5386302

    Any help would be appreciated.

  5. #5

    Join Date
    Jul 2013
    Posts
    5,192
    Location
    Georgia
    Mower
    2010 simplicity broadmoor 46" deck 20hp vanguard


  6. #6

    Join Date
    Jan 2018
    Posts
    26
    Location
    South Carolina
    Mower
    John Deere

    Re: Honda gvc 160 engines

    Thank you for this diagram.
    Prior to receiving your message, I found a similar diagram,but noted your the parts number on your diagram indicated they were for an American engine and were different from the parts diagram on the diagram i found.

    Just guessing but bet my diagram was for a chinese clone

    Any nice to.now.have 2 sets of diagram.parts.Thank you so.much for the information you provided.

  7. #7

    Join Date
    Jul 2013
    Posts
    5,192
    Location
    Georgia
    Mower
    2010 simplicity broadmoor 46" deck 20hp vanguard

    Re: Honda gvc 160 engines

    Quote Originally Posted by Tommy123 View Post
    Thank you for this diagram.
    Prior to receiving your message, I found a similar diagram,but noted your the parts number on your diagram indicated they were for an American engine and were different from the parts diagram on the diagram i found.

    Just guessing but bet my diagram was for a chinese clone

    Any nice to.now.have 2 sets of diagram.parts.Thank you so.much for the information you provided.
    You're quite welcome! Let us know how it goes.

Similar Threads

  1. Honda gvc 160 engines
    By Tommy123 in forum Honda Forum
    Replies: 8
    Last Post: 09-05-2019, 07:31 PM
  2. Engine gvc hONDA 160 LEAKING FUEL THROUGH EXHAUST
    By Grass Hunter in forum Honda Forum
    Replies: 5
    Last Post: 03-19-2016, 05:57 PM
  3. honda GVC 160 motor back fires
    By metcage in forum Small Engine & Mower Repair
    Replies: 1
    Last Post: 08-27-2014, 09:36 PM
  4. Repairs honda gvc 160 wont start
    By 4joecool in forum Honda Forum
    Replies: 1
    Last Post: 11-19-2013, 07:04 PM
  5. 491588S for a honda gvc 160
    By tybilly in forum Small Engine & Mower Repair
    Replies: 2
    Last Post: 10-12-2012, 09:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •