lkjhG1948LMF
Member
- Joined
- May 18, 2019
- Threads
- 8
- Messages
- 14
This 15x6.00-6 tubeless tire has been flat for years. I removed the tire, sanded the rim, and painted the rim. I cleaned all the rust and dirt from the tire bead. The tire bead is not circular as it should be. The bead is not circular where the tractor weight rested on the flat tire. I placed dawn-brand dish soap and water on the rim, removed the valve-stem core, wrapped the center of the tire with a ratchet strap to push the tire bead into the rim, and attached the Dill high flow air chuck to the valve stem. My compressor tank showed 150 p.s.i. when I began to air the tire. I cannot get the tire bead to seat on the rim so I cannot properly inflate the tire. Do you think I can do something without using an inner tube to salvage this tire? Please post any suggestions.