People,
Have a new push mower, MTD with a B&S engine, and this carb:
https://www.amazon.com/Briggs-and-S...ocphy=1015197&hvtargid=pla-356374369100&psc=1
After only one year the mower would not start. Yes, it had been siting over the winter, say, 4 months or so. Im taking apart this carb to clean it out to see if thats the culprit, which Im about 99% sure of. What is your opinion on these carbs? Do they gunk up that quickly? Reliability? Plastic junk? I have a 25+ year old Murray that starts up every time after winter. Cleaned carb maybe just 5 times in 25 years.
Thanks.
Have a new push mower, MTD with a B&S engine, and this carb:
https://www.amazon.com/Briggs-and-S...ocphy=1015197&hvtargid=pla-356374369100&psc=1
After only one year the mower would not start. Yes, it had been siting over the winter, say, 4 months or so. Im taking apart this carb to clean it out to see if thats the culprit, which Im about 99% sure of. What is your opinion on these carbs? Do they gunk up that quickly? Reliability? Plastic junk? I have a 25+ year old Murray that starts up every time after winter. Cleaned carb maybe just 5 times in 25 years.
Thanks.