Tom old Murray
Member
- Joined
- Nov 10, 2017
- Threads
- 1
- Messages
- 10
Hi all,
New to this forum and I sure hope you can help. I looked through some of the archive posts but couldn't find an answer for my question, therefore here I am.
Our son has a old Murray 20 HP twin with the three blade deck and it will not start. I replaced the starter awhile back and with the key on, jumped across the solenoid and the engine turned over. Therefore with my limited knowledge I assumed the solenoid to be the cause. Pulled the solenoid out to get the P/N which is a Trombetta 93265-10.
Went to the Web to find one and couldn't locate that P/N with the "-10", did locate one with a "-9". Can anyone tell me if a "-9" will work or since it is a lower "-" number might it be to small of an amp unit?
Also, since this is an old (heavy on the old) mower, chances are that this solenoid was upgraded/superseded at some point in the past. I looked for some kind of a replaced with reference, but with no luck. Is there someplace I can go to look up replacements for old parts?
I'm pretty certain if other old mowers are out there in use someone has had the need to replace this solenoid, if so what did you use?
Any and all help will be appreciated.
Thank You
Tom
New to this forum and I sure hope you can help. I looked through some of the archive posts but couldn't find an answer for my question, therefore here I am.
Our son has a old Murray 20 HP twin with the three blade deck and it will not start. I replaced the starter awhile back and with the key on, jumped across the solenoid and the engine turned over. Therefore with my limited knowledge I assumed the solenoid to be the cause. Pulled the solenoid out to get the P/N which is a Trombetta 93265-10.
Went to the Web to find one and couldn't locate that P/N with the "-10", did locate one with a "-9". Can anyone tell me if a "-9" will work or since it is a lower "-" number might it be to small of an amp unit?
Also, since this is an old (heavy on the old) mower, chances are that this solenoid was upgraded/superseded at some point in the past. I looked for some kind of a replaced with reference, but with no luck. Is there someplace I can go to look up replacements for old parts?
I'm pretty certain if other old mowers are out there in use someone has had the need to replace this solenoid, if so what did you use?
Any and all help will be appreciated.
Thank You
Tom