At 58 I've been Building, Repairing & Fixing Motorized Mechanical stuff since 8 years old I consider myself to be WAY above average when it comes to Mechanical Aptitude but this seemingly simple little Paddle Drive Re-assembly is kicking my butt big time!
I just wanted to re-position the thing so it wouldn't bother my or my kids thumbs so bad so I figure 5 minutes no problem & I took the 4 screws off & saw that there is no way to move it so I attempted to put it back together & after 60 minutes of cussing at it it still wont work! GRRRRR #^%... 8~/
Any tips or a You Tube Video would be AWESOME! I bought this thing New about 12 Years ago & it's still going Strong after 3 Boys, 2 carbs & my own abuse.
My Model # is HRR2163VXA / Serial # MCG 7213138
THANKS
I just wanted to re-position the thing so it wouldn't bother my or my kids thumbs so bad so I figure 5 minutes no problem & I took the 4 screws off & saw that there is no way to move it so I attempted to put it back together & after 60 minutes of cussing at it it still wont work! GRRRRR #^%... 8~/
Any tips or a You Tube Video would be AWESOME! I bought this thing New about 12 Years ago & it's still going Strong after 3 Boys, 2 carbs & my own abuse.
My Model # is HRR2163VXA / Serial # MCG 7213138
THANKS