Search results

Tried carb spray - to no avail. Emptied the fuel and put in new premixed fuel, and it didn’t help. Spark is good.

Welp, I decided I’m not giving up yet. New carb, fuel filter, fuel lines. Carb adjusted. Used the same fuel I used to cut wood the other day and worked fine. What do you guys see as the next steps? It worked great 3 weeks ago… thanks!

The engine will not start. Gonna replace the exhaust gasket, and carb. If that doesn’t do it, time to hand it off to a professional.

Good point. Gonna replace the carb.

Took the fan shroud off and plastic housing, and noticed the connection to my flywheel was, well no longer connected to the rectifier. It is now charging. Perhaps it got caught in the fly wheel because the metal crimp connections were still on the wires.

Cleaned the carb with my ultrasonic cleaner - to no avail. Then noticed gas coming out of the muffler so I looked at the gasket, and it is in poor condition. Reading, a prior post, it could still be a carb issue… also wondering if the muffler failure could create to much air in the cylinder...

Briggs and Stratton, 22.0 hp at 3600 RPM, V twin. Model number 44N6770056G1.

Just got back from our honeymoon, hence the late response… -12.3V…engine off -12.3V full speed -12.1V full speed, blades on -12.3V back to full speed no blades

Brand new battery. Reads 11.4V right now. Keep having to charge it before use. This was a problem that started since the last battery I purchased, 2 years ago. The mower is 3 years old. What is a good place to start?

Hi everybody! I have an oil leak and I'm not sure where it is coming from. When I add oil, it takes an hour or so and I'm back to the 'add' level on the dipstick. There is a little bit underneath the crank case/on top of the mower deck. Do you think it is coming from the breather gasket, the...